It is an economical and effective water treatment agent for protecting drinking water and industrial water system pipelines. It adopts controlled release technology and its main components are composed of polyphosphate and polysilicate. The silicon-phosphorus crystal adopts the advanced technology of the United States, and adds some ingredients suitable for the water quality of the competing countries on the basis of the original formula of the United States. Through the use of different regions in my country and a large number of practices, it has been proved that silicon-phosphorus crystal has its own uniqueness in scale inhibition, anti-corrosion and improvement of water quality, especially in anti-corrosion performance.
The silicon-phosphorus crystal is composed of 100% active ingredients. It is a glass-like pellet fired by high temperature technology. During the firing process, the mineral elements calcium, zinc, magnesium, etc. that the human body needs daily are added. Water treated with silicon-phosphorus crystals is a good way to naturally replenish minerals to the human body. Silicon-phosphorus crystals play a positive role in anti-corrosion, scale
inhibition and prolonging the service life of equipment in industrial water systems.
"Silicon Phosphorus Crystal" is a slowly dissolving spherical chemical agent. The medicament is made from a variety of phosphates and silicates through special processing techniques. For a specific water system, it is only necessary to install a dosing tank of suitable capacity on the main line and fill the tank with "silicon phosphorus crystals". When the system uses water, the "silicon phosphorus crystal" enters the water system and starts to work.
The "Silicon Phosphorus Crystal" technology is easy to use, has no power consumption, does not increase the resistance of the water system, and usually does not require special maintenance. It only needs to add "Silicon Phosphorus Crystal" once every 3-6 months. The consumption of "Silicon Phosphorus Crystal" is about 1-3 grams per ton of water. After the equipment is put into operation, the interface of "Gui Li Jing" in the medicine tank drops, and the consumption can be observed from the window hole of the medicine tank. "Silicon Phosphorus Crystal (Regent)" is a chemical water treatment agent that can be safely used in drinking water systems
Instructions for use
The operation method of using silicon-phosphorus crystal is very simple. First, put it into the medicine tank, then connect to the water source, and the medicine in the tank will produce Brownian motion through the impact of water flow. At this time, the medicine is slowly dissolved in water, and its pharmacological effect can be exerted normally. .
"Silicon Phosphorus Crystal" water treatment technology is different from other water treatment chemicals and equipment currently on the domestic market. This technology is suitable for domestic water systems. It combines the prevention of secondary pollution of water quality and the protection of water equipment. It can not only solve the problems of "yellow water" and "red water", avoid corrosion of pipes and equipment, but also inhibit the heating process. fouling problem.
"Silicon Phosphorus Crystal" is a slowly dissolving spherical chemical agent. The medicament is made from a variety of phosphates and silicates through special processing techniques. For a specific water system, just install a silicon-phosphorus crystal tank of suitable capacity on the main line and fill the tank with "silicon-phosphorus crystals". When the system uses water, the "silicon phosphorus crystal" enters the water system and starts to work.
Close the water inlet and outlet valves, open the dosing port of the tank and pour in silicon-phosphorus crystals, and the addition amount is 80% of the total capacity of the tank. Open the water inlet valve, open the drain valve at the bottom of the tank, and discharge the oxide layer and debris generated during the storage of silicon-phosphorus crystals from the sewage outlet. Close the sewage, open the water outlet valve, and it can be put into normal use.
Installation steps and requirements of silicon phosphorus crystal tank:
1. First, check whether the appearance of the equipment is damaged. If there is no abnormality in the inspection, then install it.
2. The equipment should be installed on the prepared concrete foundation platform, and the equipment does not need to be fixed with the concrete foundation platform.
3. The installation form of the equipment should be bypass installation to meet the needs of adding silicon-phosphorus crystal agents without stopping the machine.
4. The distance between the maximum outer diameter of the equipment body and the wall should not be less than 1000mm, and the distance between equipment should not be less than 1500mm.
5. The equipment maintenance distance is not less than 500mm.
6. On the pipelines of the equipment inlet and outlet, pipeline brackets should be installed near the nozzle; brackets should be installed under the valve that is directly connected to the nozzle of the container greater than or equal to DN150.
7. Valves should be installed at the water inlet, water outlet and bypass pipe of the equipment.
8. BTDR-15, 25, 40, 50FZ type equipment and pipeline are connected by thread, BTDR-65, 80, 100, 125, 150FZ type equipment and pipeline are connected by flange.
Scope of application
The silicon phosphorus crystal can be widely used in sanitary hot water, drinking water systems, heat exchangers and boiler water supply systems, industrial circulating water and water supply systems.
Silicon-phosphorus crystal is a small glass ball, which is composed of polyphosphate and silicate. The glass body is obtained by sintering the molding surface at high temperature. Silicon phosphorus crystal is slightly soluble in water, but it is enough to prevent water from corroding and scaling on metal materials. In addition, it can penetrate into the rust and make it fall off and clean the pipe wall.
Because the silicon-phosphorus crystal is quantitatively slightly soluble, the dosing process becomes extremely simple and easy. Users only need to choose different sizes of medicines according to the amount of water and connect them to the pipeline.
Features
Folding Advantages
1. Easy to use: no power consumption, no increase in the resistance of the water system, usually no special maintenance is required, only need to add "silicon phosphorus crystal" once every 3-6 months.
2. Low cost: The dosage of silicon-phosphorus crystal is about 1-5 grams per ton of water. After the equipment is put into operation, the consumption of the medicine can be observed from the window hole of the dosing tank.
3. Hygiene and safety: "Silicon Phosphorus Crystal" is a chemical water treatment agent that can be safely used in drinking water systems. The ingredients of the agent meet the standards of FAO/WHO (United Nations Food and Agriculture Organization/World Health Organization) and have been internationally recognized by NSF. " (National Foundation for Environmental Sanitation).
4. The effect is obvious: the silicon phosphorus crystal glass ball is composed of polyphosphate and silicate, and is sintered into a glass-shaped ball at high temperature. Silicon and phosphorus crystals are slightly soluble in water, and form a protective film on the tube wall that can automatically repair, preventing the corrosion and scaling of metal materials by microorganisms in the water. In addition, it can penetrate into the rust and make it fall off and clean the pipe wall.
Audited Supplier 
){kind=link}
){kind=link}